Above:
A better view of the oil cooler lines. This should be the finalized
place for them. (09/2006)
Below:
Another angle for the lines plugged in. (09/2006)

Above:
A top view of the oil cooler lines and how it runs above the alternator.
There is plenty of room between the two. (09/2006)
Below:
A painted view of the driver side custom fabricated engine mount. (09/2006)

Above:
A view of the thermostat housing taken from an E32/E34 engine. It is a
direct bolt on to the E23/E28 motor. (09/2006)
Below:
A front shot of the engine oil cooler, power steering pump and alternator.
The A/C bracket is currently being custom fabricated to fit farther back.
(09/2006)

Above:
This is what the car currently looks like on the outside. (09/2006)
Below:
Another shot of the car. (09/2006)

Above:
A view of the power steering hoses crossing over the fabricated engine mount. (09/2006)

 

<--Previous PAGE

NEXT PAGE-->

SKIP AHEAD - >    1    2    3    4    5    6    7    8    9    10    11    12    13    14